logo
良い価格  オンライン

商品の詳細

家へ > 製品 >
RJ45イーサネット コネクター
>
Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

ブランド名: NEW LIGHT
モデル番号: NLG703-01
Moq: 50個
価格: USD 4.50-9.80 / Piece
パッケージの詳細: 帯電防止袋あたり 1 個、輸出カートンあたり 100 個
支払条件: T/T、L/C、ウェスタンユニオン、
詳細情報
起源の場所:
広東省、中国
証明:
CE, RoHS, ISO 9001
製品タイプ:
パッシブ G.703 バランコンバータ、75 オーム ~ 120 オーム
インターフェースA:
2 x BNC 75 オーム アンバランス (TX / RX)
インターフェースB:
1 x RJ45 120 オームバランス、ピン 1/2 および 4/5 の 4 線式
データレート:
2.048Mbps E1、1.544Mbps T1互換
挿入損失:
1MHz~3MHzで1.0dB未満
リターンロス:
18dB以上
分離:
同軸とツイストペア間 DC500V
ビット誤り率:
300m Cat5 で 1E-10 よりも優れています
力:
不要(パッシブ)
ハウジング:
ABSボディ、ニッケルメッキBNC、金メッキセンターピン
動作温度:
-20℃~+70℃
応用:
E1 トランク、PDH および SDH ノード、PBX、SCADA、基地局送信
供給の能力:
1 か月あたり 20,000 個
ハイライト:

G.703 Balun Converter Module

,

75 to 120 Ohm G.703 Balun

,

E1 Coax to UTP Adapter

製品説明
Product Overview This G.703 balun converter matches the 75 Ohm unbalanced coax interface of E1 / T1 equipment to the 120 Ohm balanced twisted-pair interface used by routers, multiplexers and structured cabling. One RJ45 port carries the four-wire balanced signal while two BNC connectors present the transmit and receive coax pair, so PDH gear, DDF panels and SDH nodes can be linked over ordinary Cat5 twisted pair instead of twin coax. The unit is passive, epoxy sealed and
良い価格  オンライン

商品の詳細

家へ > 製品 >
RJ45イーサネット コネクター
>
Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

Passive G.703 Balun Converter with Dual BNC and 2Mbps E1 Balun Converter for 75 Ohm to 120 Ohm Impedance Matching

ブランド名: NEW LIGHT
モデル番号: NLG703-01
Moq: 50個
価格: USD 4.50-9.80 / Piece
パッケージの詳細: 帯電防止袋あたり 1 個、輸出カートンあたり 100 個
支払条件: T/T、L/C、ウェスタンユニオン、
詳細情報
起源の場所:
広東省、中国
ブランド名:
NEW LIGHT
証明:
CE, RoHS, ISO 9001
モデル番号:
NLG703-01
製品タイプ:
パッシブ G.703 バランコンバータ、75 オーム ~ 120 オーム
インターフェースA:
2 x BNC 75 オーム アンバランス (TX / RX)
インターフェースB:
1 x RJ45 120 オームバランス、ピン 1/2 および 4/5 の 4 線式
データレート:
2.048Mbps E1、1.544Mbps T1互換
挿入損失:
1MHz~3MHzで1.0dB未満
リターンロス:
18dB以上
分離:
同軸とツイストペア間 DC500V
ビット誤り率:
300m Cat5 で 1E-10 よりも優れています
力:
不要(パッシブ)
ハウジング:
ABSボディ、ニッケルメッキBNC、金メッキセンターピン
動作温度:
-20℃~+70℃
応用:
E1 トランク、PDH および SDH ノード、PBX、SCADA、基地局送信
最小注文数量:
50個
価格:
USD 4.50-9.80 / Piece
パッケージの詳細:
帯電防止袋あたり 1 個、輸出カートンあたり 100 個
受渡し時間:
在庫の場合は7営業日、カスタマイズ注文の場合は15〜20日
支払条件:
T/T、L/C、ウェスタンユニオン、
供給の能力:
1 か月あたり 20,000 個
ハイライト:

G.703 Balun Converter Module

,

75 to 120 Ohm G.703 Balun

,

E1 Coax to UTP Adapter

製品説明
Product Overview This G.703 balun converter matches the 75 Ohm unbalanced coax interface of E1 / T1 equipment to the 120 Ohm balanced twisted-pair interface used by routers, multiplexers and structured cabling. One RJ45 port carries the four-wire balanced signal while two BNC connectors present the transmit and receive coax pair, so PDH gear, DDF panels and SDH nodes can be linked over ordinary Cat5 twisted pair instead of twin coax. The unit is passive, epoxy sealed and